035-747 Abort While Dialing Rap - Xerox workcentre 5335 series Service Manual

• Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
• Disconnect then reconnect the PWBs in the FAX Module
• Check the sw version of the fax & controller sw - update if required
• Perform FAX Diagnostic GP 13
• Replace the FAX PWB (PL 18.5).
Initial Issue
WorkCentre 5335 Family Service Documentation

035-747 Abort While Dialing RAP

BSD-ON: BSD 34.1 - FAX
The operation was stopped during dialing by using the Stop button.
Procedure
The customer terminated the transmission. Ask customer to resend the job.
07/2011
2-673
BUS Updated 12/2011
Status Indicator RAPs
035-746 , 035-747