Table of Contents
Advertisement
5.
Exit Gate Solenoid removal
(Figure
3).
a.
Disconnect the connector (1).
b.
Remove the Screws (2), and the solenoid.
a
Figure 3 Removing Screws
Replacement
1.
To install, carry out the removal steps in reverse order.
Initial Issue
WorkCentre 5335 Family Service Documentation
REP 10.8 Left Hand Chute Interlock Switch
Parts List on PL 17.4
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the Exit 2 Assembly
3.
Remove the screws (6) and the Exit 2 Guide Assembly
b
NOTE: The Exit 2 Guide Assembly Screws have a different thread than the other screws,
keep them with the guide for re-installation.
4.
Left Hand Chute Interlock Switch removal; disconnect the connector, and release the sen-
sor from the assembly
Replacement
1.
To install, carry out the removal steps in reverse order.
07/2011
4-89
BUS Updated 12/2011
REP
10.5.
Figure 1 Removing Screws
(Figure
2).
4
Figure 2 Removal
(Figure
1).
3
Repairs & Adjustments
REP 10.7, REP 10.8
Advertisement
Table of Contents
