Pl 10.5 Hcf Feeder (2 Of 3) - Xerox workcentre 5335 series Service Manual

PL 10.5 HCF Feeder (2 of 3)

Item Part Description
1 – Upper Feeder Assembly (P/O PL
10.1 Item 11)
2 003E59570 Latch
3 – Shaft Latch (P/O PL 10.5 Item 1)
4 006K23124 Feed Shaft Assembly
5 – Feed Shaft (P/O PL 10.5 Item 4)
6 – Ball Bearing (P/O PL 10.5 Item 4)
7 – Gear (20T) (P/O PL 10.5 Item 4)
8 007E78180 Feed Gear (25T)
9 – Lever (P/O PL 10.5 Item 1)
10 – Bearing (P/O PL 10.5 Item 1)
11 – Spacer (P/O PL 10.5 Item 1)
12 – Pin Drive (P/O PL 10.5 Item 1)
13 – Guide (P/O PL 10.5 Item 1)
14 – Rear Upper Chute (P/O PL 10.5
Item 1)
15 – Upper Chute (P/O PL 10.5 Item 1)
16 120E21900 Actuator
17 – Upper Frame (P/O PL 10.5 Item 1)
18 – Spring (P/O PL 10.5 Item 1)
19 – HCF Stack Height Sensor, HCF
Paper Sensor (P/O PL 10.5 Item 1)
20 – HCF Pre Feed Sensor (P/O PL
10.5 Item 1)
21 – Wire Harness (P/O PL 10.5 Item 1)
22 059K26691 Feed Roll (REP 19.5)
23 059K26702 Nudger Roll (REP 19.5)
Initial Issue
WorkCentre 5335 Family Service Documentation
07/2011
5-35
BUS Updated 12/2011
Parts List
PL 10.5