Iqs6 Skew Specification - Xerox workcentre 5335 series Service Manual

IQS6 Skew Specification

Procedure
Use Side A of the Standard Test Pattern.
Initial Issue
WorkCentre 5335 Family Service Documentation
Skew must be within the following ranges (with respect to each other) at the two 10 mm refer-
ence lines shown
Table 1 Specification of Skew
Configuration
Platen (Simplex)
Platen (Duplex)
Platen (MPT)
DADF (Simplex)
DADF (Duplex)
07/2011
3-21
BUS Updated 12/2011
(Figure 1).
Figure 1 Skew
Range
+/-1.42
+/-1.87
+/-1.78
+/-2.04
+/-2.40
Image Quality