Table of Contents
Advertisement
Software Options
Certain optional features must be enabled in software by entering a password (supplied by
sales).
Procedure
1.
Enter UI Diagnostics
(Accessing UI
Diagnostics)
2.
Select Software Options on the Maintenance/Diagnostics screen.
3.
Select Keyboard.
4.
Enter the password of the software option on the keyboard displayed on the UI.
5.
Select Save.
6.
Select Reboot.
General Procedures & Information
Software Options, NVM Read/Write
NVM Read/Write
Purpose
It is possible to refer to or set/change the NVM data.
NOTE: All the NVM data including the NVM for the Key Operator are accessible. However, Bill-
ing and Auditron Administration Password cannot be rewritten.
Procedure
1.
Enter UI Diagnostics
2.
Select NVM Read/Write on the Maintenance/Diagnostics screen.
NOTE: The machine does not accept, for example, 700-6 as an abbreviation of 700-006.
When a number starts with 0, the 0 must be entered.
3.
Input the Chain-Link number and select Confirm / Change.
4.
The Current Value and the New Value columns are displayed.
5.
Enter the value that you wish to change to into the New Value column using the keypad
and select Save.
The entered value can be cleared using the C button.
NOTE: If the entered value is invalid, the following message is displayed: Incorrect
value. Please re-enter.
For a complete list of NVM locations and descriptions, refer to NVM Tables, under the
Library tab of the Service Interface
6.
The entered number is displayed in the Current Value column.
7.
Select Close to return to the Maintenance / Diagnostics screen.
07/2011
6-6
BUS Updated 12/2011
(Accessing UI
Diagnostics)
WorkCentre 5335 Family Service Documentation
Initial Issue
Advertisement
Table of Contents
