Rep 12.3 Sub Paddle Solenoid - Xerox workcentre 5335 series Service Manual

REP 12.3 Sub Paddle Solenoid

Parts List on PL 22.3
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Integrated Office Finisher from the machine
3. Remove the Inner Front Cover (PL 22.1)
4. Turn over the Integrated Office Finisher.
5. Remove the Bottom Cover (PL 22.2)
6. Disconnect the Connector (Figure 1):
(1)Release Clamps (3) and remove the wire.
(2)Disconnect Connector.
Figure 1 Disconnecting the Connector
7. Turn over the Integrated Office Finisher.
8. Remove the Sub Paddle Solenoid Assembly
(1)Disconnect Connector.
(2)Release Wire from Hook.
(3)Remove Screws (2).
(4)Remove Sub Paddle Solenoid Assembly.
Initial Issue
WorkCentre 5335 Family Service Documentation
(REP 12.1).
(Figure 2):
BUS Updated 12/2011
Figure 2 Removing the Sub Paddle Solenoid Assembly
9. Remove the Support (Figure 3):
(1)Remove Screw.
(2)Remove Support.
Figure 3 Removing the Support
10. Remove the Sub Paddle Solenoid
(1)Remove Screws (2).
(2)Remove the Sub Paddle Solenoid.
07/2011
4-99
(Figure 4):
Repairs & Adjustments
REP 12.3