Rep 12.20 Compiler Assembly - Xerox workcentre 5335 series Service Manual

REP 12.20 Compiler Assembly

Parts List on PL 22.9
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Integrated Office Finisher from the machine
3. Remove the Inner Front Cover (PL 22.1)
4. Remove the Rear Cover (PL 22.1)
5. Turn over the Integrated Office Finisher.
6. Remove the Bottom Cover (PL 22.2)
7. Remove the Tray Cover (PL 22.2)
8. Remove the Connector Bracket (Figure
(1)Release Clamps (3) and remove the wire.
(2)Disconnect Connectors (5).
(3)Remove Screws (2).
(4)Remove Connector Bracket.
Figure 1 Removing the Connector Bracket
9. Remove the Bottom Plate (Figure 2):
(1)Release Clamps (5) and remove the wire.
(2)Disconnect Connectors (8).
(3)Remove Wire from Hook.
(4)Remove Screws (4).
(5)Remove Bottom Plate.
Repairs & Adjustments
REP 12.20
(REP 12.1).
1):
BUS Updated 12/2011
Figure 2 Removing the Bottom Plate
10. Release the Clamp from the wire
(1)Release Clamp and remove the wire.
Figure 3 Releasing the Clamp
11. Remove the Stacker Tray (Figure
(1)Release wires from Clamps (5)
(2)Disconnect the Connector
(3)Remove Screws (7)
(4)Remove the Stacker Tray
07/2011
4-122
(Figure 3):
4):
WorkCentre 5335 Family Service Documentation
Initial Issue