Xerox workcentre 5335 series Service Manual page 1168

Figure 4 Removing the Support Bearing
8. Remove the Main Paddle Shaft Assembly
(1)Remove Main Paddle Shaft Assembly.
Figure 5 Removing the Main Paddle Shaft Assembly
9. Remove the Support Bearing from the Main Paddle Shaft Assembly
(1)Remove E-Clip.
Initial Issue
WorkCentre 5335 Family Service Documentation
(Figure 5):
(Figure 6):
BUS Updated 12/2011
(2)Remove Support Bearing.
Figure 6 Removing the Support Bearing
Replacement
1. Reverse the removal procedure for replacement.
07/2011
4-109
Repairs & Adjustments
REP 12.11