Rep 12.7-110 Hole Punch Unit, Motor And Sensors - Xerox ColorQube 9303 Series Service Manual

Replacement
NOTE: Ensure that the slots in the tamper assembly locate correctly in the LCSS frame.
NOTE: Ensure that the sensors are correctly located in the tamper assembly, they are easily
mis-located when being re-connected to the harnesses.
NOTE: Ensure that all connectors in the harness over the tamper assembly are securely con-
nected.
Reverse the removal procedure to replace the tamper assembly.
ColorQube® 9303 Family

REP 12.7-110 Hole Punch Unit, Motor and Sensors

Parts List on PL 12.20.
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the LCSS covers,
2. Remove and empty the chad bin,
February 2013
4-107
WARNING
GP 14. Disconnect the power cord
WARNING
REP 12.1-110.
PL 12.20 Item 4.
Repairs/Adjustments
REP 12.6-110, REP 12.7-110