500-035 Diag Document Invalid Size; 500-990 Dc612 Print Ng By Any Reason - Xerox workcentre 5335 series Service Manual

500-035 Diag Document Invalid Size

-The size of the detected document is different from the specified document size.
Procedure
Use a document of the specified size and perform the job again.
Status Indicator RAPs
500-035, 500-990

500-990 DC612 Print NG By Any Reason

Printing could not start due to unknown reason in Diag DC612 Test Pattern Print, or it was
aborted. (Only end response). This occurs during Diag execution only, and Fault Code is dis-
played on the PC-Diag and Panel.
Procedure
Perform the same operation again.
07/2011
2-1014
BUS Updated 12/2011
Initial Issue
WorkCentre 5335 Family Service Documentation