Table of Contents
Advertisement
Figure 6 IIT PWB
Replacement
1.
To install, carry out the removal steps in reverse order.
2.
Adjust the position of Full Rate/Half Rate Carriages
Initial Issue
WorkCentre 5335 Family Service Documentation
(ADJ
6.2)
07/2011
4-47
BUS Updated 12/2011
REP 6.8 Light Guide
Parts List on
PL 1.4
Removal
NOTE: Do not touch the Light Guide using bare hands.
1.
Switch off the power and disconnect the power cord.
2.
Remove the DADF
(REP
5.1)
3.
Remove the Platen Glass
(REP
6.3)
4.
Move the Full Rate Carriage to the notch on the Frame.
5.
Remove the LED Bracket
(Figure
1)
(1) Remove the screws (x3).
(2) Remove the LED Bracket.
Figure 1 LED Bracket Removal
6.
Remove the Light Guide
(Figure
2)
(1) Remove the screw.
(2) Remove the Spring Guide.
(3) Remove the screw.
(4) Remove the Spring Guide.
(5) Remove the Light Guide.
Repairs & Adjustments
REP 6.7, REP 6.8
Advertisement
Table of Contents
