Xerox workcentre 5335 series Service Manual page 1192

(2)Remove Screw.
(3)Remove Front/Rear Tamper Motor Assembly.
Figure 4 Removing the Front/Rear Tamper Motor Assembly
Replacement
1. Reverse the removal procedure for replacement.
2. Install and align the Eject Belt with marks on the Pulleys
Figure 5 Align Eject Belt
Initial Issue
WorkCentre 5335 Family Service Documentation
(Figure 5) (Figure 6):
07/2011
4-133
BUS Updated 12/2011
Figure 6 Align Eject Belt
Repairs & Adjustments
REP 12.26