Rep 6.1 Platen Cushion - Xerox workcentre 5335 series Service Manual

REP 6.1 Platen Cushion

Parts List on PL 1.1
Removal
1. Peel the Platen Cushion from the Platen Cover (held in place by double-sided tape on the
inboard and outboard edges).
2. Remove any tape or cushion residue from the Platen Cover. Be careful not to damage the
mounting surfaces.
Replacement
1. Place the Platen Cushion on the Platen Glass, at the proper position
(1) Peel off the seals (x2).
(2) Leave a gap of 0.5 ±0.3mm between the Reg. Guide and the Platen Guide.
(3) Close the Platen Cover gently and press it onto the Platen Cushion.
Figure 1 Positioning the Cushion
Initial Issue
WorkCentre 5335 Family Service Documentation
(Figure 1).
07/2011
4-35
BUS Updated 12/2011
Repairs & Adjustments
REP 6.1