Installing The Bushing And E-Ring; Attaching The Set Clamp Holder Springs - Xerox workcentre 5335 series Service Manual

Figure 16 Installing the Bushing and E-ring
11. Ensure that the Set Clamp Holder Springs are connected
Repairs & Adjustments
REP 13.17
Install
the
Bush-
ing and
the E-
ring
(Figure 17).
12. Install the Eject Roll Shaft.
07/2011
4-158
BUS Updated 12/2011
Figure 17 Attaching the Set Clamp Holder Springs
(1) Place the Eject Roll Shaft into position in the front and rear frame
WorkCentre 5335 Family Service Documentation
Spring attaches in 2
spots
(Figure 18).
Initial Issue