Table of Contents
Advertisement
7.3
I nstalling Configurator PM
3 6 B
Procedure for installing Configurator PM in a personal computer
The Configurator PM is installed in a personal computer using the procedure outlined below.
For Windows 2000, please be aware that the Configurator PM cannot be installed unless you log in at
the Administrator level when booting the system
1. Exit any applications currently running.
If there are any applications currently running, exit them.
2. Insert the setup CD.
Insert the Configurator PM setup CD in the CD drive.
3. Select "Run".
Click on the "Start" button at the lower left of the screen, or press the Ctrl + ESC keys to display the start
menu of Windows Operation System. Select "Run".
4. Enter the name of the file on which the function is to be run.
When "Run" is selected, the dialog box shown at the left is displayed. Enter d:\setup.exe and click on
the [OK] button.
Note:
The drive name "d" varies depending on the computer configuration.
7-5
Advertisement
Table of Contents
