6.1
O ccupied I/O Area
3 2 B
The input (X)/output (Y) should be allocated to use the Positioning Unit RTEX as well as other I/O units.
256 points (128-point input/128-point output) are occupied for any axis types.
Type
Number of occupied points (allocated using a tool software)
2-axis type
Input: 128 points
4-axis type
Output: 128 points
8-axis type
(128SX/128SY)
With the FPΣ or FP2, the I/O numbers vary depending on the installed position of the positioning unit
RTEX.
Reference: <FPΣ User's Manual ARCT1F333>
<FP2/FP2SH User's Manual ARCT1F320>
6-2