Verifying System Status - Fujitsu XG0224 User Manual

XG Series User's Guide
6.1.2

Verifying System Status

Verify the system status by entering the
configuration mode (admin class).
The following example shows the information that is displayed when the
Execution Example
"show system information"
# show system information
Current time : Fri Jan 14 14:00:45 2011
Startup time : Fri Jan 14 08:40:05 2011
System : XG2600
Serial No. : 00000123
ROM Ver. : 1.3
ASIC Firm Ver. : 090203PL1
Firm Ver. : V01.00 NY0001 Tue Nov 14 17:52:15 JST 2006
Startup-config : Sat Jan 01 13:08:04 2011 config1
Running-config : Sat Jan 01 13:08:04 2011
MAC : 000b5d89011
Memory : 256MB
1) Current time
Displays the current date and time.
2) Startup time
Displays the date and time when the device started up.
3) System
Displays the device name.
4) Serial No.
Displays the device serial number.
5) ROM Ver.
Displays the ROM version number in the xx.yy format. xx.yy is indicated by a
decimal value.
6) ASIC Firm Ver. (XG2600 Only)
Displays the ASIC firmware version number in the yymmddPLn format.
yymmdd is indicated by date (year-month-day). PLn shows patch level and n is
indicated by digit decimal value.
7) Firm Ver.
Displays the firmware version number in the Vxx.yy format.
"xx.yy is indicated by a two-digit decimal value.
8) Startup-config
Displays the date and time when you have saved the configuration to be read
during device startup, as well as the file name.
9) Running-config
Displays the date and time, when you applied the configuration that is currently
active.
10) MAC
Displays the MAC address with a 12-digit hexadecimal value.
11) Memory
Displays the memory size installed in the device.
command in the operation mode (admin class) or the
"show system information"
575
Chapter 6 Managing the Device
command is entered.
---(1)
---(2)
---(3)
---(4)
---(5)
---(6)
---(7)
---(8)
---(9)
---(10)
---(11)
Verifying the Device Operations