End; Quit - Fujitsu XG0224 User Manual

XG Series User's Guide

5.17.1.5 end

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Execution Example

5.17.1.6 quit

Function
Available Model
Syntax
Options
Use Mode
Explanation
Message
Execution Example
Return to the operation mode.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
end
N/A
Configuration mode (admin class)
Return from the configuration mode to the operation mode.
If the configuration has been changed, the Use Mode returns to the operation mode with
a message.
This command has the same function as the
<WARNING> The candidate-config has been changed but not committed.
The Use Mode has returned to the operation mode without reflecting the configuration.
The changed or added configuration remains unchanged.
Check whether you need to reflect the configuration.
(config)# end
#
Return to the operation mode.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
quit
N/A
Configuration mode (admin class)
Return from the configuration mode to the operation mode.
If the configuration has been changed, the Use Mode returns to the operation mode with
a message.
This command has the same function as the
<WARNING> The candidate-config has been changed but not committed.
The Use Mode has returned to the operation mode without reflecting the configuration.
The changed or added configuration remains unchanged.
Check whether you need to reflect the configuration.
(config)# quit
#
"quit" command.
"end" command.
340
Chapter 5 Command Reference
Mode and Terminal Operation Commands