Ether Snmp Information; Ether Snmp Trap Linkdown - Fujitsu XG0224 User Manual

XG Series User's Guide
5.1.9

ether SNMP Information

This section explains about the commands related to ether SNMP Information.
5.1.9.1

ether snmp trap linkdown

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Enable/disable a linkdown trap for a specified ether port.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
ether <number> snmp trap linkdown <mode>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<mode>
Enable or disable linkdown trapping for the specified port(s).
• enable
Enable trapping.
• disable
Disable trapping.
Configuration mode (admin class)
Enable or disable the linkdown trap for the specified ether port(s).
The "snmp trap linkdown"
It is assumed that the linkdown trap is enabled for all ports.
ether <number> snmp trap linkdown enable
command has a priority over this command.
151
Chapter 5 Command Reference
Port Information Settings