Terminal Timestamp - Fujitsu XG0224 User Manual

XG Series User's Guide
Caution
Default
Execution Example

5.17.2.5 terminal timestamp

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
If the host name is not set, the model name will be displayed instead.
The following shows the standard prompts of "\p" and "\$".
State
Before login :
When user login >
When administrator #
login
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
command setting can be deleted using the
The contents set in the user class are discarded at logout or execution of the
command, and they cannot be saved.
It is assumed that the following is set.
terminal prompt login "Login: "
terminal prompt user "\h \c\w\p"
terminal prompt admin "\h \c\w\p"
# terminal prompt login "Welcome: "
# terminal prompt user "[\!]\h\w\p"
# terminal prompt admin "\h bank/\C\w\p"
#
Set the command execution date and time display function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
terminal timestamp {enable|disable}
enable
Display the date and time when command is executed.
disable
Do not display the date and time when command is executed.
Operation mode (user class/admin class)
Configuration mode (admin class)
Specify whether or not to display the date and time on which execute the command.
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
command setting can be deleted using the
The contents set in the user class are discarded at logout or execution of the
command, and they cannot be saved.
It is assumed that the date and time is not displayed when the command is executed.
terminal timestamp disable
Standard prompt
"delete" command in the configuration mode.
"delete" command in the configuration mode.
348
Chapter 5 Command Reference
"save" command. This
"admin"
"save" command. This
"admin"
Mode and Terminal Operation Commands