System Log Information; Syslog Server Address - Fujitsu XG0224 User Manual

XG Series User's Guide
5.15.2

System Log Information

This section explains about the commands related to system log information.

5.15.2.1 syslog server address

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the server IP address that receives system log information.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
syslog server <number> address <address>
<number>
• Definition number
Specify the definition number of the server that receives system log information
(message) with a decimal value from 0 to 2.
<address>
• IP address
Specify the IP address of the server that receives system log information (message).
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Configuration mode (admin class)
Set the server IP address that receives system log information (message).
The following describes the procedure for outputting system log information.
1) Send information to a server the host with the IP address set in syslog server <address>.
2) Display information with the
If STP is used, it takes a long time for transmission to be enabled after device startup.
During this time, some messages are discarded before reaching the server.
When transferring system logs to a Linux server, be sure to enable remote logging by
using the "-syslogd -r" command or editing the syslog init file to include the "-r" qualifier.
It is assumed that the server that receives system log information is not specified.
"show logging syslog"
285
Chapter 5 Command Reference
command.
Device Information Settings