Ether Media - Fujitsu XG0224 User Manual

XG Series User's Guide
5.1.1.3

ether media

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Sets media type for Ethernet ports.
XG0224 / XG0448
ether <number> media <type>
<number>
• Ethernet port number(s)
Configure Ethernet port number(s) to be used as base 10 value(s).
If configuring multiple port numbers, separate them with a comma.
Use hyphens to specify a range of port numbers. (ex: "1-8")
Refer to the beginning of this chapter for details on how to specify port numbers.
Range
21 to 24 XG0224
45 to 48 XG0448
<type>
Media type.
• metal
Use 10/100/1000BASE-T ports (RJ45)
• fiber
Use SFP Ports.
*The 100BASE-FX module can be used by XG0224 / XG0448.
• auto
Automatically selects media type.
*However, if both Ethernet and SFP ports are connected the SFP ports are used.
Configuration mode (admin class)
Sets the type of media to be used by the Ethernet port.
• If auto is selected and cables are connected to 10/100/1000BASE-T ports as well as to
SFP ports, the SFP ports will be selected.
• Similarly, with the auto setting, if 10/100/1000BASE-T port(s) are in a link up state and
SFP slot(s) are put into a link up state by connecting a cable to them, operation
changes to the SFP slot(s) and the 10/100/1000BASE-T port(s) change to a link down
state.
• Use the fiber setting if using the 100BASE-FX module.
(The 100BASE-FX module cannot be used with the auto setting.)
If unset, automatic selection of media type will be the default.
ether <number> media auto
Model
92
Chapter 5 Command Reference
Port Information Settings