Dumpswitch; Sysname - Fujitsu XG0224 User Manual

XG Series User's Guide

5.15.8.6 dumpswitch

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default

5.15.8.7 sysname

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Allows/disallows dumping of data to external media.
XG0224 / XG0448 / XG0440DC / XG0440DCR
dumpswitch <mode>
<mode>
• enable
Allows dumping of data to external media via a dump switch.
• disable
Disallows dumping of data to external media via a dump switch.
Configuration mode (admin class)
Allows/disallows dumping of data to external media via a dump switch.
If unset, dumping of data to external media via a dump switch will be allowed.
dumpswitch enable
Set a name of this device.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
sysname <name>
<name>
• Name
Specify a name of this device using up to 32 characters from 0x21, 0x23 to 0x7e ASCII
set.
Configuration mode (admin class)
Set a name of this device.
The name set in this command can be used as the MIB variable, sysName, which is used
for SNMP. In this case, by deleting the sysName value set in the
command, the host name set in this command can be used as sysName.
This command is not directly associated with the
regarding the behavior on the network. However, their names should be identical for
network control purposes.
When you use LLMNR function, please start "sysname" at alphabetic characters, and
use only alphameric characters, "-" and "_". Some LLMNR client can't use some symbols
and string start at numeric characters.
It is assumed that a name of this device is not set.
"snmp agent sysname"
308
Chapter 5 Command Reference
"snmp agent sysname"
command
Device Information Settings