Linkaggregation Algorithm - Fujitsu XG0224 User Manual

XG Series User's Guide

5.1.1.20 linkaggregation algorithm

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the load distribution algorithm of link aggregation.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
linkaggregation <group> algorithm <type>
<group>
• Link aggregation group number
Set a link aggregation group number with a decimal number.
Range
1 to 13 XG0224
1 to 26 XG0448
1 to 22 XG0440DC / XG0440DCR
1 to 10 XG2600
<type>
Specify the load distribution algorithm.
• sa-mac
Distribute frames based on the source MAC address.
• da-mac
Distribute frames based on the destination MAC address.
• both-mac
Distribute frames based on the exclusively ORed (XORed) source and destination
MAC addresses.
• sa-ip
Distribute frames based on the source IP address.
• da-ip
Distribute frames based on the destination IP address.
• both-ip
Distribute frames based on the exclusively ORed (XORed) source and destination IP
addresses.
Configuration mode (admin class)
Set an algorithm for each link aggregation group.
It is assumed that "both-mac" has been set for the load distribution algorithm of the link
aggregation.
linkaggregation <group> algorithm both-mac
111
Chapter 5 Command Reference
Model
Port Information Settings