Linkaggregation Downrelay Port - Fujitsu XG0224 User Manual

XG Series User's Guide

5.1.1.26 linkaggregation downrelay port

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the linked port list information about the linkaggregation Linkdown Relay function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
linkaggregation <group> downrelay port <portlist>
<group>
• Link aggregation group number
Set a link aggregation group number with a decimal number.
Range
1 to 13 XG0224
1 to 26 XG0448
1 to 22 XG0440DC / XG0440DCR
1 to 10 XG2600
<portlist>
• Relay port list
Set a list of the Ethernet ports that places the linked port offline (linkdown) by linkdown
where this definition has been set.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
Configuration mode (admin class)
If a linkdown occurs in the linkaggregation set with this definition, set a list of the Ethernet
ports that will also linkdown (port linkdown).
If a linkdown relay operation occurs, its linked port goes to an offline state, and a system
log is output.
• If ports are offline, release them with the
• The definition is applied normally even if a port set with linkaggregation is included on
the relay operation port list.
• When the Ethernet port type is a linkaggregation port, and this definition is set in the
linkaggregation settings, this definition becomes enabled and the Linkdown Relay
function is ignored.
• The linked port does not change to offline status during the dynamic definition change
Linkdown operation on the Ethernet port where this command is set.
The Linkdown Relay function is not executed, assuming that port list information has not
been set.
"online" command in port releasing.
117
Chapter 5 Command Reference
Model
Port Information Settings