Linkaggregation Type - Fujitsu XG0224 User Manual

XG Series User's Guide

5.1.1.22 linkaggregation type

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Set a link aggregation type.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
linkaggregation <group> type normal
linkaggregation <group> type backup <backup_group> <priority>
<group>
• Link aggregation group number
Set a link aggregation group number with a decimal number.
Range
1 to 13 XG0224
1 to 26 XG0448
1 to 22 XG0440DC / XG0440DCR
1 to 10 XG2600
normal : Normal link aggregation
Multiplexed multiple ports are used as a normal ports.
backup : Backup link aggregation.
Multiplexed multiple ports are used as a backup ports.
<backup_group>
• Backup group number
Set a backup group number with a decimal number.
Range
1 to 13 XG0224
1 to 26 XG0448
1 to 22 XG0440DC / XG0440DCR
1 to 13 XG2600
<priority>
• Priority of backup port
It is a priority of the link aggregation used as a backup port.
Set the master port or backup port if "type backup" has been specified.
master: Master port
backup: Backup port
Configuration mode (admin class)
Set a link aggregation type.
Select the normal link aggregation or the backup link aggregation.
The backup link aggregation can also be used for backup of broadband ports.
Cautions on "type backup" setting
• If a link aggregation, that has the same priority as the port defined as "master" or
"backup", exists in the same backup group, the port will be enabled as a backup port
but the link aggregation will be disabled.
• If more than one master or backup link aggregation exists in the same backup group,
the link aggregation with a smaller link aggregation group number will be enabled. The
backup link aggregation with a larger link aggregation group number will be disabled.
113
Chapter 5 Command Reference
Model
Model
Port Information Settings