Show Lacp Statistics - Fujitsu XG0224 User Manual

XG Series User's Guide

5.22.1.2 show lacp statistics

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Execution Example
Display the LACP statistics.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
show lacp statistics
N/A
Display all statistics.
Operation mode (user class/admin class)
Configuration mode (admin class)
Display the LACP statistics.
The statistics are cleared if the device is restarted or the valid LACP definition is not
found in the device.
The item is not displayed if its counter is zero (0). If the LACP is not operating on a port,
the item is displayed when its counter is not zero.
# show lacp statistics
LACP statistics information:
[ETHER PORT-1]
45 transmitted lacpdu
46 received lacpdu
12 start collecting/distributing
13 stop collecting/distributing
5 receive timeout lacpdu
1 transmitted marker pdu
1 received marker pdu
21 received lacpdu no link
1 transmission error
1 received error
[ETHER PORT-3]
53 transmitted lacpdu
52 received lacpdu
4 start collecting/distributing
3 stop collecting/distributing
#
1) Port number
2) Number of sent lacpdu packets
3) Number of received lacpdu packets
4) Number of times the aggregation link is disabled, changing from the enabled state,
to send or receive packets
5) Number of times the aggregation link is disabled to send or receive packets
6) Number of times the lacpdu packet reception was timed out
7) Number of times the marker pdu packet was sent
8) Number of times the marker pdu packet was received
9) Number of lacpdu or marker pdu packets received when the LACP was disabled
10) Number of times the packet sending has failed
11) Number of times the packet reception has failed
437
LACP Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
--- (1)
--- (2)
--- (3)
--- (4)
--- (5)
--- (6)
--- (7)
--- (8)
--- (9)
--- (10)
--- (11)
Commands