Ethernet Counter, Log, And Statistics Clear Commands; Clear Ether Statistics - Fujitsu XG0224 User Manual

XG Series User's Guide
5.20.2

Ethernet Counter, Log, and Statistics Clear Commands

This section explains the commands related to Ethernet counter, log, statistics,
and statistics clear commands.

5.20.2.1 clear ether statistics

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Execution Example
Clear the statistics of Ethernet physical ports.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
clear ether statistics [line <line>]
N/A
Clear all the statistics.
line <line>
Clear the statistics of the specified port.
No statistics are not cleared if the specified port number is invalid.
The management port is specified by "m1".
Range
1 to 26 XG0224
1 to 52, c1 to c4 XG0448
1 to 44, c1 to c4
1 to 26, m1 XG02600
When specifying multiple port numbers, separate them with commas (,).
The specification of the port simultaneously other than m1 and m1 are also possible.
The specification of the port simultaneously other than c1-4 and c1-4 are also possible.
When specifying sequential numbers, separate them with hyphens (-). (Example: "1-8")
Operation mode (admin class)
Configuration mode (admin class)
Clear the statistics of the Ethernet physical port.
Specifying only the "line" option will clear the statistics of the target port.
XG0224 / XG0448 / XG0440DC / XG0440DCR
It might be considered that it restores it from the state of the roughhouse once when
broadcast/multicast roughhouse control information is set, and the statistical information
of "clear ether statistics" pertinent port is cleared with the reception rate exceeds the
threshold.
# clear ether statistics
#
XG0440DC / XG0440DCR
430
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
Model
Commands