Ether Vlan Tag - Fujitsu XG0224 User Manual

XG Series User's Guide
5.1.1.9

ether vlan tag

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the tagged VLAN.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
ether <number> vlan tag <tagged_vidlist>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<tagged_vidlist>
• Tagged VLAN ID list
Set a tagged VLAN ID.
When setting multiple IDs, separate them with commas (,).
Configuration mode (admin class)
Set a tagged VLAN ID.
To add a VLAN, specify the VLAN ID list including already registered VLANs.
The M1 port internally uses maximum VLAN ID in unused.
Therefore, the communication of the M1 port is temporarily interrupted when VLAN ID
allocated in the M1 port is specified by the vlan tag command, and the TCP session is
cut. (Only XG2600)
N/A
101
Chapter 5 Command Reference
Port Information Settings