Configuration Operation Commands; Load - Fujitsu XG0224 User Manual

XG Series User's Guide
5.19.3

Configuration Operation Commands

This section explains about commands related to configuration definition information operations.

5.19.3.1 load

Function
Available Model
Syntax
Options
Use Mode
Explanation
Message
Read (or load) the configuration.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
load <filename>
<filename>
Specify the name of the file to be read (or loaded).
Configuration mode (admin class)
Read the specified configuration.
All the data being set will be invalid.
The following file names can be specified.
running-config : Running configuration file
startup-config : Startup configuration file
config1 : Configuration 1 file
config2 : Configuration 2 file
load failed: config read error
Since the device has a high communication load, it failed in reading the configuration.
Stop the communication load, and execute the command again.
<WARNING> weak admin password: set the password
The administrator password is not set.
Set an administrator password.
<WARNING> weak admin password: contain at least 8 characters
The administrator password is seven or fewer characters in length.
Set an administrator password with eight or more characters.
<WARNING> weak admin password: contain a different kind of character
The administrator password consists of only alphabetic characters or only numeric
characters.
Set an administrator password with alphanumeric characters and symbols mixed.
<WARNING> weak user password: contain at least 8 characters
The user password is seven or fewer characters in length.
Set a user password with eight or more characters.
<WARNING> weak user password: contain a different kind of character
The user password consists of only alphabetic characters or only numeric characters.
Set a user password with alphanumeric characters and symbols mixed.
380
Configuration Display, Delete and Operation Commands
Chapter 5 Command Reference