Saving/Restoring Configuration Information; Saving/Restoring Configuration Information Using Ftp - Fujitsu XG0224 User Manual

XG Series User's Guide
6.2 Saving/Restoring Configuration
Information
This device allows you to save/restore configuration information using the following methods:
•

Saving/restoring configuration information using FTP

• Saving/restoring configuration information using a CompactFlash card
• Saving/restoring configuration information using USB memory
6.2.1 Saving/restoring configuration information using FTP
Available Model
This device provides FTP and SFTP server functions, and allows you to use PC or UNIXR system ftp and sftp commands
to save/restore configuration information.
This section presents an example of using the XG2600's FTP server function with ftp commands.
To use the SFTP server function, sftp client software supporting SSH protocol version 2 is necessary. This would allow
you to use sftp commands just as you use ftp commands.
Use the following user name and password with the FTP server function:
• User name
• Password
When the password is not defined, the FTP server function works assuming that no password exists.
Note
Files for maintenance
The FTP server function maintains files with the following names:
• Configuration information 1
• Configuration information 2
Restart method
Enter "get reset" as a subcommand for the ftp command to restart the device.
To switch the configuration information, use "get reset1" or "get reset2" to restart the device.
• When get reset" is entered
• When "get reset1" is entered
• When "get reset2" is entered
Precautions
• It is strongly recommended to define the password to ensure security.
While no password is defined, anyone can access to the device from the network, resulting in a very dangerous
situation.
Reference
All models
: ftp-admin
: Specify the password configured with the password command
: config1
: config2
: The current configuration information takes effect after restart.
: Configuration information 1 takes effect after restart.
: Configuration information 2 takes effect after restart.
"5.14 Password Information", p. 262.
580
Chapter 6 Managing the Device

Saving/Restoring Configuration Information