Ether Downrelay Recovery Cause - Fujitsu XG0224 User Manual

Hide thumbs Also See for XG0224:
Table of Contents

Advertisement

XG Series User's Guide

5.1.1.18 ether downrelay recovery cause

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the target parameters for releasing the offline state on the Linkdown Relay function of
the Ethernet port.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
ether <number> downrelay recovery cause <cause>
<number>
• The Ethernet port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<cause>
Specify the offline parameters targeted for releasing the offline state of linked port from
the following.
• downrelay
Specify when offline parameters with the Linkdown Relay function are targeted for
release.
• all
Release all the parameters offline states.
Configuration mode (admin class)
Set the offline parameters targeted to releasing offline state lead by linkup when "auto"
was specified on "ether downrelay recovery" command.
Set the parameters assigned for releasing of offline state during the releasing operation.
• This command is enabled only when "auto" is specified in
mode"
command. The definition is ignored when "manual" is specified.
• The offline state is released without depending on this command definition when the
"online"
command in the linked port is executed, or during dynamic definition change
accompanied by releasing of the offline state.
It is assumed that "downrelay" was specified for the target parameters of offline state
release of the linked port list.
ether <number> downrelay recovery cause downrelay
109
Chapter 5 Command Reference
"ether downrelay recovery
Port Information Settings

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xg0448Xg2600Xg0440dcXg0440dcr

Table of Contents