Ether Macfilter Move - Fujitsu XG0224 User Manual

XG Series User's Guide
5.1.5.2

ether macfilter move

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Change the priority of MAC filter.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
ether <number> macfilter move <count> <new_count>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<count>
• Source priority
Set the source priority with a decimal value.
<new_count>
• Destination priority
Set the destination priority with a decimal value.
Range
0 to 511 XG0224 / XG0448 / XG0440DC / XG0440DCR
0 to 63 XG2600
Configuration mode (admin class)
Change the priority of MAC filtering for each Ethernet port.
If the current priority is set as <count>, change the priority of this definition to
<new_count>.
When the definition is changed, the priority is renumbered.
N/A due to an edit command.
138
Chapter 5 Command Reference
Model
Port Information Settings