Lacp Information; Ether Lacp Port-Priority - Fujitsu XG0224 User Manual

XG Series User's Guide
5.1.7

LACP Information

This section explains about the commands related to LACP information.
5.1.7.1

ether lacp port-priority

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the LACP port priority.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
ether <number> lacp port-priority <priority>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<priority>
• Priority of LACP port
Set the port priority with a decimal value from 1 to 65535.
A smaller value has a higher priority.
Configuration mode (admin class)
Set the priority of LACP port. The LACP port priority is used as the priority for the
connection port to be selected by the link aggregation group. A smaller value has a
higher priority. If the priority is the same, the port with a smaller number has the higher
priority in port selection.
It indicates the priority of port selection in the local device. The final port selection for the
final connection depends on the LACP system priority.
However, this definition is no use if the active or passive is not specified for the
linkaggregation operation mode of "the linkaggregation mode".
It is assumed that 32768 has been specified as the LACP port priority.
ether <number> lacp port-priority 32768
148
Chapter 5 Command Reference
Port Information Settings