Terminal Prompt - Fujitsu XG0224 User Manual
Hide thumbs
Also See for XG0224:
- Hardware manual (47 pages) ,
- User manual (614 pages) ,
- Safety and installation manual (14 pages)
Table of Contents
Advertisement
XG Series User's Guide
5.17.2.4 terminal prompt
Function
Available Model
Syntax
Options
Use Mode
Explanation
Set the input prompt.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
terminal prompt login "<prompt>"
terminal prompt user "<prompt>"
terminal prompt admin "<prompt>"
login
Set the input prompt during login.
user
Set the input command prompt to be used during login with the user class.
admin
Set the input command prompt to be used during login with the admin class.
<prompt>
Specify a character string of the input prompt. Up to 80 characters are allowed.
Operation mode (user class/admin class) (user option)
Operation mode (admin class) (login or admin option)
Configuration mode (admin class)
Specify a character string for login prompt or command input prompt.
If a space is included in a character string, enclose it in double quotation marks (").
If the prompt character string contains a special character beginning with a back slash as
shown below, it will be replaced with an expanded character string.
Special character
\c
"config2" only if the configuration file name is config2
\C
Number of file name for the configuration file (1 or 2)
\d
Date (month/date format)
\h
Host name or Model name (character string before ".")
\H
Host name or Model name (all character string)
\m
Model name
\p
Prompt character string according to the class (including space)
\t
Time (hour:minute:second format, 24 hour time system)
\T
Time (hour:minute:second format, 12 hour time system)
\@
Time (hour:minute NN format, 12 hour time system, NN:am or pm)
\v
Firmware version
\w
Configuration directory
\!
History number
\\
A single backslash character
If this device is running with bank0 configuration, "\c" displays no information, including a
space before or after "\c".
If the device is running with bank1 configuration, "\c" displays "bank1".
"\h" or "\H" displays the host name which is set with the
Expanded character string
347
Chapter 5 Command Reference
"sysname"
command.
Mode and Terminal Operation Commands
Advertisement
Table of Contents
