Fujitsu XG0224 User Manual page 366

XG Series User's Guide
13) inspiration_temp
Environment temperature.
internal_temp
Device inside temperature.
XG2600
# show system status
Current-time
Startup-time
restart_cause
machine_state
access_direction
power_redundancy
PSU1 state
PSU2 state
PSU1 type
PSU2 type
power_consumption
FAN1 state
FAN2 state
inspiration_state
inspiration_temp
warning time : Fri Dec 26 14:00:45 2008
recover time : Fri Dec 26 14:12:30 2008
internal_state
inspiration_temp
internal_temp
1) Current time
Present date and time.
2) Startup time
Date and time when the system started up.
3) restart_cause
Cause for the system startup.
The following system startup causes are displayed:
power on : The power has been turned on.
reset : The reset command has been issued.
reset switch : The [RESET] switch has been pressed.
system down : System-down has occurred.
4) machine_state
State of the device
RUNNING
FALLBACK
5) access_direction
Direction where a device is installed in.
front access
rear access
6) power_redundancy
State of the redundant power unit.
single
redundant
: Thu Dec 21 16:04:50 2008
: Thu Dec 21 16:04:36 2008
: power on
: RUNNING
: front access
: redundant
: NORMAL
: NORMAL
: AC
: AC
: 75 W
: NORMAL
: NORMAL
: NORMAL
: NORMA
: NORMAL
: 35 C
: 32 C
: The device is active.
: The device is into fallback state.
: The device should be installed forward.
: The device should be installed backward.
: The device has no redundant power unit.
: The device has a redundant power unit.
366
Chapter 5 Command Reference
---(1)
---(2)
---(3)
---(4)
---(5)
---(6)
---(7)
---(8)
---(9)
---(10)
---(11)
---(12)
---(13)
System Operations and Display Commands