XG Series User's Guide
5.1.1.11 ether egress permission
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
5.1.1.12 ether loopdetect use
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the forwarding permission port list information.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
ether <number> egress permission <portlist>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<portlist>
• Forwarding permitted port list
Specify a list of the Ethernet ports that are permitted to forward data.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
Configuration mode (admin class)
Set a port list to allow forwarding via the ports.
If a link aggregation port or a backup port is specified on the port list, forwarding is
allowed via all ports of the link aggregation or backup group.
It is assumed that forwarding has been permitted for all ports.
Set to use the Loop Detection function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
ether <number> loopdetect use <mode>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<mode>
• on
Enable the Loop Detection function.
• off
Disable the Loop Detection function.
Configuration mode (admin class)
Set whether or not to enable the loop detection function.
Disable if the system is stopped by the "loopdetect use" definition even if this mode is set
to be effective.
It is assumed that the loop detection function is enabled.
ether <number> loopdetect use on
103
Chapter 5 Command Reference
Port Information Settings