Lan Ip6 Dscp - Fujitsu XG0224 User Manual

XG Series User's Guide
5.5.2.8

lan ip6 dscp

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Set DSCP value rewrite condition
XG0224 / XG0448 / XG0440DC / XG0440DCR
lan [<number>] ip6 dscp <count> acl <acl_count> <new_dscp>
<number>
• lan definition number
Specify lan definition number with a decimal value
<count>
• DSCP rewrite definition number
Specify priority of DSCP rewrite condition with a decimal value.
Range
0 to 511 XG0224 / XG0448 / XG0440DC / XG0440DCR
<acl_count>
• ACL definition number
Specify ACL definition number with a decimal value
- ip6
If ip6 value is not configured, that filter definition is ignored
- tcp
This is enabled when ip6 <protocol> value is 6
- udp
This is enabled when ip6 <protocol> value is 17
- icmp
This is enabled when ip6 <protocol> value is 58
<new_dscp>
• DSCP value
Specify Rewrite DSCP value with a decimal value from 0 to 63
Configuration mode (admin class)
Set DSCP value rewrite condition
Note1.
If none of "acl ip6" definition exist on the access control list which has been specified by
<acl> or if the access control list specified by <acl> does not exist, the QoS processing is
not applied to those packets.
Note2.
If a queue is selected in <action> and if this queue has not been associated with the
priority by the "qos cosmap"
Note 3.
This command is unavailable if the allowable upper limit for the device is exceeded.
The allowable upper limits are as follows.
• Upper limit based on "commands"
128 commands for the entire device.
Up to 128 commands can be set for the entire device, including the
aclmap" and "lan ip6 dscp"
command, the QoS processing is not executed.
commands.
209
Chapter 5 Command Reference
Model
"vlan ip6qos
LAN Information Settings