Ether Flowctl - Fujitsu XG0224 User Manual

Hide thumbs Also See for XG0224:
Table of Contents

Advertisement

XG Series User's Guide
5.1.1.7

ether flowctl

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the flow control function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
ether <number> flowctl <send> <receive>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<send>
• on
Send flow control packets.
• off
Do not send flow control packets.
<receive>
• on
Controls the flow when flow control packets are received.
• off
Do not control the flow even when flow control packets are received.
Configuration mode (admin class)
Set the operation of flow control function on the Ethernet port using the transmission and
reception functions. The backpressure function is enabled in half-duplex link mode.
The flow control function is enabled independently of the link speed being set by the
"ether mode"
command.
It is assumed to have been specified to take the flow control only when a flow control
packet is received.
ether <number> flowctl off on
96
Chapter 5 Command Reference
Port Information Settings

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xg0448Xg2600Xg0440dcXg0440dcr

Table of Contents