Fujitsu XG0224 User Manual page 456

XG Series User's Guide
1) Destination/Masklen
The destination network address and the mask value are displayed.
If routed via the host, no mask value is displayed.
Gateway: The gateway address is displayed.
The direct route indicates the MAC address of the gateway. If the
gateway address is not resolved, link#x is shown (where, x is an
interface index number that the system automatically assigns to each
interface).
Flag : The entry type is displayed. The details are as follows.
U (Up)
G (Gateway)
H (Host)
S (Static)
R (Reject)
B (Blackhole) : Indicates the discarded route (without ICMP unreach
Interface: The destination interface is shown.
2) Entry
The number of entries, excluding the route entries used inside the device, is
displayed.
: Indicates that the route is enabled.
: Indicates the route which requires an
intermediaterouting such as gateway.
: Indicates the host entry.
: Indicates the static route.
: Indicates the discarded route (with ICMP unreach
transmission).
transmission).
456
Chapter 5 Command Reference
Routing Table Entry Display Commands