Fujitsu XG0224 User Manual page 407

XG Series User's Guide
The following information is displayed only for an internal connected port of XG0448
40) External port in which it belongs to internal, connected port
41) Opposed internal, connected port.
The counter of an internal, connected port becomes a frame that has been
forwarded from the Giga/10Giga port with the value to which the header for an
internal control in 12 bytes is added.
42) Number of received MAC control frames
43) Number of reception frames abandoned by resource shortage or Back Pressure
44) Number of reception frames abandoned by filtering
45) Number of reception frames abandoned by be not of STP in state of forwarding.
The number of reception frames abandoned because it doesn't belong to set VLAN
is contained for XG0448.
46) Number of reception frames annulled by reception annulment setting
47) Number of reception frames abandoned because it doesn't belong to set VLAN.
48) Number of reception frames abandoned by other reasons
- When the MAC header or the IP header is the following values
All ..TTL.. ..Destination IP address 0, Source.. 0 etc. abnormal checksum and
abnormal length
- For a not corresponding frame to the entry of the IP multicast table
- For the internal control frame not forwarded to an external port in case of an internal,
connected port
- When it is annulled without being output among frames that the flooding is done
without being recognized an abnormal frame in the input port
49) Number of sent MAC control frames
50) Number of frames in which FCS error or FCS alignment error is detected with over
size (1519 bytes or more) frame
51) Number of frames abandoned in chip
52) Number of frames (with 64 byte data size) received and number of frame (with
64byte data size) received per second (Frames/sec.)
53) Number of frames (with data size of 65 to 127 bytes) sent and number of frame
(with data size of 65 to 127 bytes) sent per second (Frames/sec.)
54) Number of frames (with data size of 128 to 255 bytes) received and number of
frame (with data size of 128 to 255 bytes) received per second (Frames/sec.)
55) Number of frames (with data size of 256 to 511 bytes) received and number of
frame (with data size of 256 to 511 bytes) received per second (Frames/sec.)
56) Number of frames (with data size of 512 to 1023 bytes) received and number of
frame (with data size of 512 to 1023 bytes) received per second (Frames/sec.)
57) Number of frames (with data size of 1024 to 1518 bytes) received and number of
frame (with data size of 1024 to 1518bytes) received per second (Frames/sec.)
58) Number of frames (with data size of 1519 to 2047 bytes) received and number of
frame (with data size of 1519 to 1522bytes) received per second (Frames/sec.)
59) Number of frames (with data size of 2048 to 4095 bytes) received and number of
frame (with data size of 2048 to 4095 bytes) received per second (Frames/sec.)
407
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
Commands