Ether Mdi - Fujitsu XG0224 User Manual

XG Series User's Guide
5.1.1.6

ether mdi

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the MDI.
XG0224 / XG0448 / XG0440DC / XG0440DCR
ether <number> mdi <mode>
<number>
• ether port number
Set a port number to use with a decimal value. When setting multiple port numbers,
separate them with commas (,). When setting sequential numbers, separate them with
hyphens (-). (Example: "11-16")
Range
1 to 24 XG0224
1 to 48 XG0448
1 to 40 XG0440DC / XG0440DCR
<mode>
Specify the MDI mode.
• auto
Set the MDI or MDI-X auto detection mode.
• mdi
Set the fixed MDI mode.
• mdix
Set the fixed MDI-X mode.
Configuration mode (admin class)
Set the MDI mode for the Ethernet port.
• The auto mode is enabled only when "auto" or "1000M fixed" is specified in the
mode" command.
If anything other than "auto" is specified in the
as MDI-X port.
• If "1000M" is set in the
"ether mode"
Detect mode setting is disabled. The port operates as MDI port.
• If "auto" is set in the
"ether mode"
X fixed mode setting is disabled. The port always operates as MDI port.
It is assumed that MDI/MDI-X Auto Detect mode has been specified.
ether <number> mdi auto
Model
"ether mode"
command, the MDI-X fixed mode or the Auto
command for the 10/100/1000BASE-T port, the MDI-
95
Chapter 5 Command Reference
"ether
command, the port operates
Port Information Settings