Setting the Hotkey Key Combination
Switch the keys used to enter the Hotkey Mode (see "Hotkey Operation" on page 23)
1. Invoke Hotkey mode:
2. Press
message closes and Hotkey mode is automatically exited.
Setting the OSD Hotkey combination
Hotkeys used to access the OSD (see "OSD Hotkey" on page 18) can be switched between [
], [
L
S
OCK
CROLL
1. Invoke Hotkey mode: [
2. Press
message closes and Hotkey mode is automatically exited.
Setting the Port Operating System
Match a port's operating system configuration to that of the computer attached to the port.
1. Invoke Hotkey mode: [
2. Press one of the following function keys:
After pressing a function key, Hotkey mode is automatically exited.
Restore the Default Values
Restore the KVM switch default values (see "Restore Default Values" on page 20) using this
administrator-only Hotkey.
1. Invoke Hotkey mode: [
2. Press
3. Press [
message closes and Hotkey mode is automatically exited.
26
[N
L
UM
OCK
to display the command line "Hotkey has Been Changed" for one second, then the
[H]
], [
], [
, and [
L
C
C
]
OCK
TRL
TRL
N
L
UM
OCK
to display the command line "Hotkey has Been Changed" for one second then the
[T]
N
L
UM
OCK
Key
Description
Sets the Port OS to Windows
F1
F2
Sets the Port OS to Mac
F3
Sets the Port OS to Sun
N
L
UM
OCK
.
[R]
] to display the command line "Reset to Default Setting" for three seconds, then the
E
NTER
or
.
] + [-]
[C
] + [F12]
TRL
], [
].
A
A
LT
LT
] + [-] or [
] + [
].
C
F12
TRL
] + [-] or [
] + [
].
C
F12
TRL
] + [-] or [
] + [
].
C
F12
TRL
S
CROLL