Ether Type - Fujitsu XG0224 User Manual

XG Series User's Guide
5.1.1.8

ether type

Function
Available Model
Syntax
Options
Set a port type.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
ether <number> type normal
ether <number> type mirror <count> <source> <mode>
ether <number> type linkaggregation <group>
ether <number> type backup <group> <priority>
<number>
• ether port number
Set a port number to use with a decimal value. When setting multiple port numbers,
separate them with commas (,). When setting sequential numbers, separate them with
hyphens (-). (Example: "11-16")
normal : Normal port
mirror : Target mirroring port
linkaggregation : Link aggregation port
backup : Backup port
<count>
• Definition number
Specify the source port number with a decimal number.
Range
0 to 25 XG0224
0 to 51 XG0448
0 to 43 XG0440DC / XG0440DCR
0 to 25 XG2600
<source>
• Source port number
Set the source port number with a decimal number if mirroring has been specified.
Range
1 to 26 XG0224
1 to 52 XG0448
1 to 44 XG0440DC / XG0440DCR
1 to 26 XG2600
<mode>
• Mirroring mode
Set one of the following operation modes if mirroring has been specified.
rx : The receive frames of the source port are mirrored.
tx : The send frames of the source port are mirrored.
both : Both the send and receive frames of the source port are mirrored. [XG0224 / XG0448
/ XG0440DC / XG0440DCR]
Model
Model
97
Chapter 5 Command Reference
Port Information Settings