Usb Port Control Commands; Usbctl - Fujitsu XG0224 User Manual

XG Series User's Guide

5.45 USB Port Control Commands

This section explains about commands related to USB Port Control Commands.
5.45.1 USB Port Control Commands

5.45.1.1 usbctl

Function
Available Model
Syntax
Options
Use Mode
Explanation
Execution Example
Disables or enables USB ports.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
usbctl <mode>
<mode>
• enable
Enable USB port.
• disable
Disable USB port.
Operation mode (admin class)
Configuration mode (admin class)
Enables/disables USB ports.
When enabled, if overcurrent status is detected, recommences supply of electricity and
clears overcurrent detection status.
When disabled, connected USB memory will appear to be disconnected in order to cease
supply of electricity.
# usbctl enable
#
552
Chapter 5 Command Reference
USB Port Control Commands