Bridge Counter, Log, Statistics, And Status Clear Commands; Clear Bridge - Fujitsu XG0224 User Manual

XG Series User's Guide
5.28.2 Bridge Counter, Log, Statistics, and Status Clear
Commands
This section explains the commands related to bridge counter, log, statistics,
and status clearing.

5.28.2.1 clear bridge

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Execution Example
Initialize the dynamically learned MAC address from the learning table.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
clear bridge
clear bridge port <portlist>
clear bridge mac <macaddr> <vid>
N/A
Delete all dynamically learned MAC addresses from the learning table.
• port
Specify to delete port by port.
• mac
Specify to delete MAC address by MAC address.
<portlist>
• port list
Specify a list of physical port numbers to initialize learning table.
When specifying multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8").
<macaddr>
• MAC address
Specify the MAC address to be deleted from the learning table.
(It must be in the xx:xx:xx:xx:xx:xx format, where "xx" is a 2-digit hexadecimal value.)
<vid>
• VLAN ID
Specify a decimal VLAN ID from 1 to 4094.
Operation mode (admin class)
Configuration mode (admin class)
Delete dynamically learned MAC address from the learning table.
• The address statically learned by the "vlan forward" command definition is not
initialized.
• If a member port of link aggregation is specified, all learning addresses of the link
aggregation are deleted.
# clear bridge
#
469
Bridge Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
Commands