Stp Domain Priority - Fujitsu XG0224 User Manual

XG Series User's Guide
5.8.1.6

stp domain priority

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the bridge priority.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
stp domain <instance-id> priority <priority>
<instance-id>
• STP instance ID number
Specify a decimal value from 0 to 15.
For non-MSTP operation mode, entering a value from 1 to 15 makes it invalid, although
the allowable range is set with a value from 0 to 15.
<priority>
• Priority
Specify the priority of this device in the bridge network with a decimal value from 0 to
61440. A smaller value has a higher priority.
Configuration mode (admin class)
Specify the priority of the bridge used for the algorithm for determining the root bridge.
Specify the minimum value for a bridge to be used as a root bridge.
<priority> must be an integer (valid value) that is divisible by 4096.
• Valid values
0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056,
49152, 53248, 57344, 61440
If an integer other than the valid values is specified, this setting is disabled.
It is assumed that 32768 is set for the entire instance priority.
stp domain 0 priority 32768
227
Chapter 5 Command Reference
STP Information