Show Usb Storage Status - Fujitsu XG0224 User Manual

XG Series User's Guide

5.21.1.2 show usb storage status

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Displays USB mass storage controller status.
XG0448 / XG0440DC / XG0440DCR / XG2600
show usb storage status
N/A
Operation mode (user class /admin class/CE class)
Configuration mode (admin class/CE class)
Displays current status for USB mass storage controller.
# show usb storage status
[Thread]
Status
[Device #1]
Status
Speed
Geometry probing
Test unit ready
Inquiry
Mode sense
Read capacity
Read format capacities : ----
Hold data
Error status
Error reason
Error event
Request sense code
[Storage specs]
Vendor
Product
Product Rev.
Total sectors
Cylinders
Heads
Sectors per track
[USB specs]
Speed
Max LUN
[USB configuration]
Device address
Interface
Sub class
LUN
BulkInEP
BulkOutEP
1) USB mass storage controller thread status
Status is displayed via the following messages:
Uninit: not initialized
Waiting for USBD active
Waiting for entry class completed
Active
The information below is displayed only when a connected USB device has
been detected.
: Active
: Idle
: Full
: Success
: Success
: Success
: Success
: Success
: Not exist
: Get device specs [5/5] (Read format capacities) ---(7)
: Transfer URB failure
: 0x3200000d
: (02, 10, 00)
: FUJITSU
: USB PortableDrive
: 3.96
: 500400
: 695
: 15
: 48
: Full
: 3
: 1
: 0
: 6
: 0
: 0x82
: 0x02
432
USB connection Counter, Log, Statistics, and Status Display and Clear
Chapter 5 Command Reference
---(1)
---(2)
---(3)
---(4)
---(5)
---(6)
---(8)
---(9)
---(10)
---(11)
---(12)
---(13)
---(14)
---(15)
---(16)
---(17)
---(18)
---(19)
---(20)
---(21)
---(22)
---(23)
---(24)
---(25)
Operation Commands