Command Alias; Alias - Fujitsu XG0224 User Manual

XG Series User's Guide
5.17.4

Command Alias

This section explains about commands related to command alias.

5.17.4.1 alias

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Execution Example
Set the command alias information.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
alias <alias> "<command>"
<alias>
Specify a command alias name to be assigned, with up to 80 characters.
This name must begin with an alphabetical character, and it can be followed by
alphanumeric characters and hyphens (-).
<command>
Specify a command name and command options, to be replaced during execution of
command alias, using a pair of double quotation marks.
If no name or option is enclosed by a pair of double quotation marks (""), the definition is
deleted.
Operation mode (user class/admin class)
Configuration mode (admin class)
Combine the command name and some command options, and set them as a new
command. Up to 30 commands can be set.
Specifying the set command alias will delete the previously registered command and the
specified one is set.
The set command alias is reflected immediately, and it can be used promptly.
The set command alias, if executed, will be replaced with the set command name and
command options to execute the command.
When executing the command, the options that were input following the command alias
are assumed to be input succeeding the command name and command options that
were replaced with the command alias.
An input line remains in the command execution history without being replaced with a

command alias.

The following command alias names cannot be registered.
• "exit", "end", "quit", "up", "top", "delete", "show", "clear", "commit", "discard", "save",
"load", "reset", "moff"
Other normal command names can be registered as command aliases; however, note
that the operations of the registered normal commands are changed.
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
command setting can be deleted using the
The contents set in the user class are discarded at logout or execution of the
command, and they cannot be saved.
It is assumed that no data is registered.
# alias history "show logging command brief"
# history
1 alias history "show logging command brief"
2 history
#
"delete" command in the configuration mode.
355
Chapter 5 Command Reference
"save" command. This
"admin"
Mode and Terminal Operation Commands