Vlan Information Settings; Vlan Common Information; Vlan Name - Fujitsu XG0224 User Manual

XG Series User's Guide
5.3

VLAN Information Settings

This section explains about VLAN information settings.
VLAN ID allowed range
The VLAN ID, which is to be specified in <vid> of [Options] described in each command of this section, shall be within
the range specified as shown below.
Range
1 to 4094
5.3.1

VLAN Common Information

This section explains about the commands related to VLAN common information.
5.3.1.1

vlan name

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Set the VLAN name.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
vlan <vid> name <name>
<vid>
• VLAN ID
Specify a VLAN ID with a decimal value.
VLAN1 has been defined as the default port VLAN during device startup, and it has
been registered as the "default" VLAN name.
<name>
• VLAN name
Specify the VLAN name using up to 32 characters from the 0x21, 0x23 to 0x7e ASCII
set.
Configuration mode (admin class)
Set a VLAN name.
If this command is omitted, VLAN1 is set to the "default".
If a VLAN other than VLAN1 is created, it is set in the 'v'+<vid> format.
(Example: If vid=5, "v5" is set.)
If "delete vlan <vid> name" is specified, the VLAN name is initialized but the VLAN itself
is not deleted. (The VLAN can be deleted by the "ether vlan" command.)
When VLAN ID is 1
vlan 1 name default
When VLAN ID is other than 1
vlan <vid> name 'v'+<vid>
Model
156
Chapter 5 Command Reference

VLAN Information Settings